NextDent 5100 Spares

You will hand-pour resin into the resin tray before printing. The NextDent 5100 Printer works with all NextDent™ print materials, allowing the prin...

The carbon filter located on the back of the upper build chamber, must be replaced every three months. If the filter gets resin on it, it must be ...

 Keeps dust out of the printer while feeding air to the cooling fan

Glass resin tray for 3BFAB SEGA 3D Printer

The printer comes with a pedestal in a separate package that serves several purposes: Allows printer to roll for easy movement Provides storage s...

Replacement 18W/78 lamp for the NextDent LC-3D Printbox See the oven's Instructions for Use for information on the correct orientation of lamps.

Replacement 18W/71 lamp for the NextDent LC-3D Printbox See the oven's Instructions for Use for information on the correct orientation of lamps.

Used to cover a print tray that contains resin, so as to protect it from UV light exposure during storage. Can also be used during resin tray clean...

The Punch Tool is used to remove printed parts from the NextDent 5100 print platform

Replacement print platform for the NextDent 5100 3D Printer System Pack of 1 The 3D-printed part adheres to the print platform during building

Used to remove parts from the print platform after printing

Used to aid in cleaning partially cured resin off the print platform and printed part

For cleaning print platforms that run elastomeric resins such as Ortho IBT or Gingiva Mask Special Considerations for Elastomeric Resins For cleani...