

Designed as a table-top model with SiC heating rods, this comparably inexpensive high-temperature furnace offers numerous advantages when sintering non-translucent zirconia with an operating temperature of up to 1500 °C. The heating chamber and fast heat-up times make this model a good choice for CAD/CAM machining of zirconia. The controller of the furnace is freely programmable for the individual sintering of the zirconia material. The high-temperature furnace is also designed for connection to the single-phase power grid.
Technical specifications
Model | Tmax | Inner dimensions in mm | Volume | Maximum | Outer dimensions in mm4 | Connected | Electrical | Weight | Minutes | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
°C | w | d | h | in l | units | W | D | H1 | load kW | connection* | in kg | to Tmax2 | |
LHTCT 01/16 | 1550 | 110 | 120 | 120 | 1.5 | 30 | 340 | 300 | 460 + 195 | 3.5 | 1-phase | 18 | 30 |
LHTCT 03/16 | 1550 | 120 | 210 | 120 | 3.0 | 60 | 400 | 535 | 530 + 215 | 10.0 | 3-phase3 | 40 | 30 |
*These furnaces are available for main voltage of 200 V, 208 V, 220 V - 240 V, 1/N/PE or 2/PE1Including opened lift door 2In the empty and closed furnace, connected to 230 V 1/N/PE rsp. 400 V 3/N/PE3Heating only between two phases 4External dimensions vary when furnace is equipped with additional equipment. Dimensions on request. |