Skip to content

Resin Cleaner

Sold out
£66.38

Liqcreate Resin Cleaner is an excellent, effective non-toxic post-print cleaning solution for 3D printing. It is a safe, highly effective cleaner solution and cleans faster than other cleaner liquids based on IPA, bio-ethanol and other chemicals. This resin cleaner is not a dangerous good, non-flammable and has no unpleasant odor. The cleaning liquid can clean SLA, DLP and MSLA/ LCD printed objects, platforms, instruments and Surfaces (if not made of ABS or polystyrene polymer). It can be used with ultrasonic cleaners and the liquid can be used several times without refilling or filtering the Liqcreate Resin Cleaner.

Liqcreate Resin Cleaner stands for:

  • Excellent and effective cleaning

  • Minimal odor

  • Non-toxic, non-hazardous and non-flammable

  • Biodegradable

  • Ultrasonic cleaner compatible (not with ABS / polystyrene exterior)

  • Not leaving residue, cracks or white haze

Effective & non-toxic resin cleaner solution for 3D printing and an excellent IPA or bio ethanol substitute. 

Liqcreate Resin Cleaner is an excellent, effective non-toxic post-print cleaning solution for 3D printing and an excellent IPA or bio ethanol substitute. This resin cleaner is not a dangerous good, non-flammable and has no unpleasant odor. The cleaning liquid can clean SLA, DLP and LCD printed objects, platforms, instruments and surfaces. It can be used with ultrasonic cleaners and the liquid can be used several times without refilling or filtering the Liqcreate Resin Cleaner. Liqcreate Resin Cleaner is compatible with Liqcreate resins and many other 3D printing resins, developed for SLA, DLP and LCD 3D printers with a 385 – 420 nm light source.  

 Liqcreate Resin Cleaner for SLA DLP and LCD 3D printing resins and surfaces

Do not dilute Liqcreate Resin Cleaner with water. For best results, pre-wash in a separate container (ultrasonic bath) to remove excess resin. In case of skin contact: wash off with soap and water. Keep out of reach of children. Do not eat, drink or smoke when using this product. Do not let (resin contaminated) product enter drains. Store below 30°C in closed container. Due to the high boiling point of Liqcreate Resin Cleaner, the cleaner won’t evaporate from surfaces like ethanol or IPA.

Liqcreate Resin Cleaner is not compatible with ABS or Polystyrene tools / surfaces. Using Resin Cleaner on that type of polymers, the surface will become softer or brittle. Please check the outer box of the ultrasonic bath. For example, if the exterior of the ultrasonic cleaner is made of ABS polymer, the use of Resin Cleaner inside the ultrasonic bath is not recommended.